Exporting Project Files via USB

Exporting Project Files via USB

Overview

You can access your iCON iCS project files directly from your tablet by connecting it to a PC via USB. This is useful for backing up projects, transferring data, or accessing files when the in-app export is not working as expected.

Steps

  1. Connect your tablet to a PC using a USB-C cable.
  2. On the tablet, open Settings > Connected Devices > USB.
  3. Select Use USB for File Transfer.
  4. On your PC, open File Explorer.
  5. Navigate to:
    This PC > [Tablet Name, e.g. CSX8] > Internal shared storage > iCON > Projects
  6. Locate your project folder. Project folders are named after your project and contain an .irmprj folder structure.
  7. Copy the entire project folder to your PC.

Notes

  • The tablet name shown in File Explorer may vary depending on the device model (e.g., CSX8).
  • Exported CSV and DXF files created within iCON Trades are saved to the export location you selected (internal or external storage) and can also be accessed via this USB method.

Related Articles

    • Related Articles

    • Export Units Mismatch (Feet vs. Metric)

      Overview If your exported CSV or DXF files show incorrect unit values, the cause is that the distance units in iCON Trades are not set to match your CAD software's expected units. Exported files reflect the distance unit setting configured within ...

    • Points Missing from Export (CSV / DXF)

      Overview If measured points disappear from the screen or are missing from exported CSV or DXF files, the cause is typically a filter setting, an incorrect export configuration, or a corrupted project file. Step 1: Check the Points Filter Navigate to ...

    • Fusion 360 Import Error: 3D Polylines Not Supported

      Overview When importing DXF files from iCON iCS into Fusion 360, you may receive an error or find that geometry is missing. This is because Fusion 360 does not support 3D polylines, which are the default line type exported by iCON Trades. Workarounds ...

    • Setting Up Your First 3D Disto Measurement Project

      Before You Start Make sure you have completed the following before heading to the job site: The Leica 3D Disto software is installed on your Windows PC or tablet Your CCP license key has been activated successfully The 3D Disto battery is fully ...

    • Troubleshooting 3D Disto Connection Issues (USB, Bluetooth, Wi-Fi)

      Overview The Leica 3D Disto connects to your PC or tablet via USB, Bluetooth, or Wi-Fi depending on your model. If the software cannot detect the instrument, work through the steps below before contacting support. General Checks (All Connection ...