DISTO Battery and Charging Guide

DISTO Battery and Charging Guide

Overview

Leica DISTO models use either replaceable AAA batteries or a built-in rechargeable lithium battery, depending on the model. This guide covers both types.

Models with Replaceable AAA Batteries

Many standard DISTO models (such as the D1, D2, D110, and D210) use 2 x AAA alkaline batteries.

  • Replace both batteries at the same time. Do not mix old and new batteries.
  • Use alkaline batteries for best performance. Rechargeable NiMH batteries may work but can show shorter life due to lower voltage.
  • Remove batteries if the device will not be used for more than a month to prevent leakage.

To replace: Open the battery compartment on the bottom or back of the device, insert the new batteries in the correct orientation, and close the cover.

Models with Rechargeable Built-In Battery

Higher-end models (such as the D810 touch, X3, and X4) have a built-in rechargeable battery charged via USB or a proprietary connector.

  • Connect the supplied USB cable to the device's charging port and plug into a USB power source.
  • The battery indicator on screen will show charging progress.
  • Charge time is typically 2–3 hours from empty.
  • The device can be used during charging in most models.

Battery Life Tips

  • Turn off the device when not in use. Most DISTO models auto power-off after a few minutes of inactivity.
  • Cold temperatures significantly reduce battery performance — keep the device warm in winter conditions.
  • Avoid leaving the device in a hot vehicle for extended periods.

Low Battery Warning

When the battery is low, the battery icon will flash or a warning symbol will appear on screen. Save your work and recharge or replace batteries before the device powers off automatically.

Related Articles

    • Related Articles

    • Troubleshooting DISTO Measurement Errors

      Overview If your Leica DISTO is displaying error messages or giving unexpected readings, this guide covers the most common causes and fixes. Common Error Messages "- - - -" or No Reading Displayed Cause: The laser could not detect a return signal ...

    • Lino Battery and Power Management

      Overview Leica Lino models use either standard AA alkaline batteries or a built-in rechargeable battery, depending on the model. This article covers battery replacement, charging, and power-saving tips. Models with AA Batteries Most standard Lino ...

    • Charging the iCON iCS for the First Time

      Overview The iCON iCS battery ships partially discharged. Before first use, charge the instrument fully to ensure accurate battery reporting and optimal battery life. Charging Instructions Connect the supplied power adapter to the USB-C charging port ...

    • DISTO Display Modes, Units, and Settings

      Overview The Leica DISTO allows you to customize units, measurement reference, and display brightness to suit your workflow. This article covers the most common settings found across DISTO models. Changing Measurement Units The DISTO can display ...

    • Leica 3D Disto vs. Leica DISTO: What's the Difference?

      Two Different Products Leica makes two distinct product lines that share similar naming but serve very different purposes. Customers often contact us expecting support for one and owning the other, so it’s worth clarifying upfront. Leica DISTO ...